Vortex Gas Flow Meter

Features Of Vortex Gas Flow Meter:

The fundamental and practical Karman Vortex principle is adhered to by the Vortex Gas Flow Meter. The Vortex Gas Flow Meter produced by Wepower Electronic is easy to install and has a straightforward design. Customers place it during installation by aligning it with the arrow indicated on the vortex flow meter’s main body. The medium inlet is the plane on which the triangular column is situated.

The main body of the Vortex Gas Flow Meter produced by Wepower Electronic is fully welded, and the main body material is SS304 or SS316. Due to the full welding method, users do not have to worry about the internal parts falling off when using the vortex gas flow meter. The surface of the vortex flow meter is smooth and the measurement is not hindered. In addition, it has the characteristics of high precision, high quality, anti-interference and anti-vibration.

What Are The Precautions When Installing Vortex Gas Flow Meter?

▲Potential safety risks due to unpredictable outdoor temperatures, we generally advise users to put the vortex gas flow meter indoors.

▲It is not recommended to install the vortex flow sensor at the pump’s inlet or outflow. The vortex flow meter’s measurement will be impacted by the oscillating fluid that is frequently produced near the pump mouth.

▲The inner diameter of the pipe to be measured needs to be the same as the inner diameter of the flow meter, and the flange welding at both ends of the vortex flow meter should ensure parallel.

▲The power line and the signal output line of the vortex shedding flow meter should be kept apart; if they are installed in the same trench, the signal line should be shielded by a different metal pipe.

Parameters: