- Have any questions?
- +86 15953537010
- admin@wepower-electronic.com
Radar Tank Level Transmitter
WERD801 radar tank level transmitter adopted 26G high frequency radar sensor, which is full PTFE antenna is suitable for measuring various strong corrosive liquids, preventing slight condensation.
The 26G high frequency radar sensor, which has a complete PTFE antenna and can measure a variety of very corrosive liquids while preventing mild condensation, was used by the WERD801 radar tank level transmitter. Tetrafluoroethylene, the material used to make the antenna structure, has a high resistance to corrosion. Utilizing its benefits of cheap maintenance, high performance, high precision, high reliability, and extended service life, the measurement is stable and has a great after-use effect.
The 801 radar tank level transmitter is commonly used for measuring corrosive liquids in smaller tanks, and it can be placed using a threaded connection and flange connection. The PTFE rod needs to be put into the measurement tank, and the radar transmitter is mounted at 1/4 or 1/6 of the diameter.
| Product Name | 26GÂ Radar Tank Level Transmitter |
| Model | WERD801 |
| Medium | Corrosive liquid |
| Process Connection | Thread G1½″A ,Thread 1½ ,NPT, Universal Flange |
| Measurement Accuracy |
± 5mm |
| Display | LCD, Programmable |
| Material |
Antenna :PTFE |
| The seal between the shell and the shell cover: Silicone rubber | |
| Casing window: Polycarbonate | |
| The ground terminal: Stainless Steel | |
| Housing : Aluminum / Stainless steel | |
| Cable parameters | Cable entrance / plug: 1 M20xl.5 cable entrance ;1 blind plug |
| Terminal : Conductor cross section 2.5mm² | |
| Power Supply： | 2-wire（DC24V）/ 4-wire（DC24V /AC220V ） |
| Output signal | 4… 20mA / HART (2-wire / 4-wire ) |
| RS485/ Modbus | |
| Blind area | the ends of the antenna |
| Maximum measuring range | 20m |
| Pressure | -0.1-0.3MPa |
| Adjust time | about 1 second (depending on the parameter settings) |
| Explosion-proof Grade | Exiaâ…¡C T6 Ga / Exd â…¡C T6 Gb |
| Process temperature | -40℃~130℃ the temperature of the antenna part |
| Working & Storage Temperature | (-40～100) ℃ |
| The instrument is preferably installed at 1/4 or 1/6 of the diameter of the tank. 1. datum 2. The container center or axis of symmetry. Note: The minimum distance from the tank wall should be 200mm. |
 |
| The top conical tank level, can be installed at the top of the tank is intermediate, can guarantee the measurement to the conical bottom. |  |
| Typical installation errors: Conical tank cannot be installed above the feed port.
Note: outdoor installation should adopt sunshade. 1. Correct 2. Error rainproof measures |
 |
| There are obstacles affecting measurement needed reflection plate.
1. Correct 2. Error |
 |
