- Have any questions?
- +86 15953537010
- admin@wepower-electronic.com
Tuning Fork Level Sensor
No matter where it is installed, the Wepower Tuning Fork Level Sensor can detect the limits of the medium with a reliable accuracy of the millimeter.
No matter where it is installed, the Wepower Tuning Fork Level Sensor can detect the limits of the medium with a reliable accuracy of the millimeter.
Working Principle Of Tuning Fork Level Sensor:
▲Tuning fork Level Sensor is to vibrate a fork with resonance frequency. When the liquid level in the storage tank changes, the fork is immersed or exposed to the liquid surface, and the vibration frequency will change accordingly, so that the corresponding measurement result can be obtained.
▲Vibrating Level Switch, which is used for granules and solids. When the fork is covered by solid, its vibration will weaken. Electronic component of the Tuning fork Level Sensor converts this weakened signal into a switch command to prevent overflow or air.
▲The Tuning Fork Level Sensor, which is used to detect powder, can reliably detect the lowest and highest level of powder or fine particles of powder or fine particles. When the fork is covered by the powder, the vibration is weakened, it is not affected by dust, and the object is accurately measured.
We can offer both the aluminum housing type tuning fork level switch and compact stainless steel body type tuning fork level sensor, with different power supply options, wetted parts length, signal output, product dimension, process connecting ( thread, flange, tri-clamp ), normal or high temperature medium temperature, whether corrosive liquid medium, medium is liquid or solid etc. In a word, we are professional and glad to offer products based on your real site parameters!
| Product Name | Tuning Fork Level Sensor |
| Medium: | liquid, powder or granular solid |
| Measured medium density: | solid ≥0.1g/cm³ Liquid ≥0.7g/cm³ |
| Measured solid particle size: | ≤10mm |
| Maximum liquid viscosity: | <1000mm2/s |
| Measured medium repose angle: | ≥200 |
| Fork Length: | 40mm/100mm |
| Temperature: | Medium temperature range: -20°C～150°C |
| Ambient temperature: -20°C～80°C | |
| Environmental humidity: | ≤95%RH |
| Pressure range: | ≤1MPa |
| Product Material: | Housing Material: Die Cast Aluminum Alloy Or Compact Stainless Steel |
| Fork body material: SS304/SS316 | |
| Explosion-proof grade: | DIIBT4 |
| Housing protection class: | IP65 |
| Process Connection: | 1″ NPT thread;3/4″ thread,1/2″ thread, G1″ thread etc Flange (user selected) |
| Supply voltage: | DC24V; AC220V 50HZ |
| Output signal: Relay output: | 5A 220VAC ; 3A 24VDC |
| Power consumption: | ≤ 2W |
| Vibration frequency: | 300±50Hz |
| Environmental vibration level: | V.L.4 acceleration is less than 1 |
| Switch signal action time: | 1-60S |
Installation Guidance
